Melting gun FESTA 12W 7,2mm pink

Technical specifications:

Glue sticks: 7.2 mm

Voltage: 230 V, 50 Hz

Power: 12 W

Instructions for use:
Insert the stand into the openings on both sides of the glue gun. Before connecting the glue gun to the mains, place it on the stand and insert a glue stick into the opening at the rear of the gun. Connect the glue gun to the mains and allow it to heat up for approximately 5 minutes. If necessary, clean the surfaces to be bonded before applying the glue. Then apply the glue in lines or drops to the surfaces and press them together immediately. After finishing, disconnect the glue gun from the mains and place it on the stand to cool down. The glue stick may be left inside the glue gun. Remove any glue residue from the nozzle after the gun has cooled down.

Safety instructions:
Store the glue gun in a relatively dry and warm place and protect it from direct contact with water. Always disconnect the glue gun from the mains after use and keep it out of reach of children. Caution: hot glue and the glue gun nozzle may cause burns. Do not use the glue gun if it has visible damage or if the power cable is damaged. Do not use the glue gun near flammable materials or for bonding flammable materials.