MIG welder 120 NO-GAS MIG/TIG lift/MMA

MIG 120 is a lightweight, compact wire welding machine based on IGBT transistors, with a single-phase 230V power supply.

Functions: No-gas MIG, TIG lift, MMA consumable electrode welding.

Allows welding with 0.8 and 0.9mm gasless flux cored wire.

Synergic control and manual adjustment.

Equipped with protection functions with intelligent overvoltage, overcurrent and overheating protection.

If any of these problems occur, the alarm light on the control panel lights up and the welding current output circuit of the device is automatically switched off to protect and extend the service life of the device.

MIG 120 is suitable for working outdoors and on construction sites due to its small dimensions and weight.

The wire feed mechanism is equipped with one drive roller and a 1kg/100mm wire roller holder.

Automatic cooling, the fan is activated when the device warms up.

Technical specifications:

Power supply ~1× 230V ± 10% 50 / 60 Hz

Welding current 30 - 120 A

Load capacity 15% 120A, 60% 60 A, 100% 46.5A

Arc voltage 57 V

Wire feed mechanism, 1-drive roller

Wire roller 1 kg / Ø100 mm

Wire diameter 0.8 or 0.9 mm

Current consumption up to 24 A

Current eff. 9A

Power factor 0.64

Efficiency 82%

Insulation class H

Protection class IP21S

Weight 3.75 kg

Dimensions 275×145×175 mm

Complete set:

• MIG 120

• MIG torch 2m

• Grounding cable with terminal 1.2m DX25

• Electrode holder with cable 1.2m DX25